Status Items

This status item indicates which input is active on outputs A1 and A2. Can be SDI-1,SDI-2 or Analog.

This status item indicates the presence and format of a valid signal in input 1. This is displayed as:

This status item displays the detected standard WSS value of input 1. This is displayed as follows:

This item displays the detected SMPTE 2016 (AFD) values of input 1. This is displayed as follows:

This item indicates whether the 3Gb/s input on input 1 is Level A or Level B. When the input is not 3Gb/s, NA is indicated.

This indicates the mapping of the 3Gb/s input 1 when the input format is 1080p50 or 1080p60. Can be Level A or Level B. When the input format is not 3Gb/s, this item indicates NA.

Displays the detected VI value found in input 2. This is displayed as listed under sInp1_VI.

Displays the detected WSS-extended value found in input 2. This is displayed as listed under sInp1_WSS-ext.

This item indicates CRC and EDH errors on input 2. Can be:

Displays the detected WSS-standard value found in input3 (CVBS input). This is displayed as listed under sInp1_WSS-Stnd.

This status item indicates the detected input format on the CVBS input. This is displayed as one of the following values:

Displays what line is detected the switchline for channel A. Can be any line between 0 and 1125.

Displays the position on the detected switchline where the switch occurred (in pixels) in Channel A. Only works on blanked switchlines.

Displays what line is detected as the switchline for channel B. Can be any line between 0 and 1125.

Displays the current position on the detected switchline where the switch occurred (in pixels) in Channel B. Only works on blanked switchlines.

Displays the current function outputs B1 and B2. For the card it can only be Trans, TestPattern or NA.

Displays the currently closed GPI contacts. This is displayed as for instance 1_3_ when contacts 1 and 3 are closed and for instance _234 when contacts 2, 3 and 4 are closed.

Displays the current value of GPI pool B.

This indicates the mapping of the (last known) output when the output format is 3Gb/s (1080p50 or 1080p60). Can be Level A or Level B. When the output format is not 1080p60 or 1080p50, this item indicates NA.